Polish vertical takeoff plane
Original polish PROJECT! This plane is equipped with a vertical takeoff and landing system (VTOL). It is made of composite materials and is powered only by electric motors.
Takeoff and landing procedure is performed using four reliable vertical takeoff engines. After reaching the transition height, the front motor is started. This motor allows the plane to stay in the air for up to 240 minutes.
Plug&Play system, vertical takeoff and landing make flight preparation and operation surprisingly simple and convenient.
Impresses with its design
VERTICAL TAKEOFF AND LANDING
Adapted to work in the most difficult conditions
Long flight time up to 240 minutes
STRENGTH AND SAFETY
Confirmed by strength and EMC tests
Developed with passion - built with experience
We care about safety and quality of our machines, which is why we tested individual parts of the unmanned aerial vehicle in laboratory conditions. Thanks to strength tests we can check in practice what maximum loads our structure can withstand. Does it agree with our calculations?
Appropriate arrangement of fibers, proper annealing of our components and many other parameters can increase load resistance by more than 200%.
Proven and reliable electronics
We have performed electromagnetic compatibility tests of our aircraft. We have checked the system’s resistance against external disturbances and the emission of high intensity electromagnetic waves on undesirable frequencies – the emissivity of the aircraft is within norm, it does not interfere with any devices installed in the airplane. We also identified which antennas give us the greatest range and we also investigated the most advantageous place of their installation.
The test were carried out in accordance with the RED Directive: 2014/53/EU and the EMC Directive: 2014/30/EU.Contact Us STORE
Up to 240 minutes
MAXIMUM PAYLOAD MASS
20 m/s (72km/h)
Vertical takeoff and landing
The graph relates a flight at altitude 120m AGL with 70% sidelap in optimal weather condition.
GCS - ground control station
an application available to everyone that allows you to use the full potential of our drones. Due to the huge number of functions, it is dedicated to advanced pilots.
QGround control station
For those who are familiar with PX4
For people who have previously worked on the PX4 firmware. The application is available for windows, iOS and android.
When basic functionality isn’t enough.
Mobile Charging Stations
Mobile battery charger. It allows for simultaneous charging of two batteries. The entire kit is packed inside of a waterproof case that eases the transport
DROTAG.x updated version of an earlier DROTAG. It is a small circuit board that allows your camera trigger and georeference images (latitude, longitude, height and direction) in flight!
RFD Access Point
RFD Access Point is a wireless communication module between the drone and the Ground Control Station. Connection takes place via Wi-Fi
HAVE YOU WONDERED WHERE YOU CAN USE THIS TYPE OF DRONE?
See what specialists from BZB UAS used Koliber drones for
OIL & GAS