Default PLN pricelist
  1. All Products
  2. CANPDB w/ 4A BEC & GH Splitter

CANPDB w/ 4A BEC & GH Splitter

https://www.bzbuas.com/web/image/product.template/736/image_1920?unique=9345d3c

The CANPDB w/ 4A BEC & JST-GH Splitter by Matek Systems is primarily used in RC (Radio Control) and FPV (First-Person View) drone setups. This device serves as a power distribution board (PDB) that integrates a 4A Battery Eliminator Circuit (BEC) and multiple JST-GH connectors for streamlined power management and signal routing.
71.39 zł 71.39 PLN 71.39 zł z VAT 
58.04 zł z VAT 
Contact to order

This combination does not exist.

Contact Us

Regulamin
 Wysyłka w ciągu 2-3 dni roboczych

Compact and lightweight CANPDB w/ 4A BEC & JST-GH Splitter

Power Distribution:

It provides efficient power distribution from the main battery (supporting 6V to 55V) to various components of the drone, ensuring stable voltage levels and reducing the risk of power surges.. 

Integrated BEC:

The built-in 4A BEC outputs a regulated 5.2V, which is ideal for powering flight controllers, receivers, and other onboard electronics that require a consistent 5V supply.

JST-GH Splitter

The splitter allows for easy connection of multiple peripherals using JST-GH connectors, which are commonly used for CAN (Controller Area Network) communication in drones. This setup helps in organizing and managing the wiring efficiently.

CAN Bus Compatibility:

The board supports CAN bus communication, making it compatible with various modern flight controllers and peripherals that utilize this protocol for data transfer and control.

Compact and Lightweight:

The small form factor (38 x 26 x 7.8mm) and light weight (12g) make it suitable for use in drones where space and weight are critical considerations.

Includes short-circuit tolerance (up to 3 seconds), but lacks reverse polarity protection, requiring careful wiring during installation to avoid damage.

This device is particularly useful in custom drone builds and high-performance RC models, where reliable power management and organized wiring are key for optimal performance and ease of maintenance.

Specifications

  • 6V to 55V Operating Input Range(2S-12S Li-xx)
  • 5.2V output on “5V” pin/pads
  • Support total 4A Continuous load current. 1A for each JST-GH port
  • Maximum Duty Cycle: 100%, when input voltage< setting value, Regulator output voltage = Input voltage
  • No protection for reversed input polarity
  • Output Short-circuit tolerant (3 seconds)
  • 5x CAN-H/CAN-L are in parallel
  • CAN port connector: JST-GH 4pin(SM04B-GHS-TB)
  • Size & Weight: 38 x 26 x 7.8mm, 12g
  • Protections: No input reverse polarity protection.


PACKAGE DETAIL

  • 1x CANPDB-4A
  • 1x JST-GH-4P to JST-GH-4P 20cm silicon wire