Default PLN pricelist
  1. All Products
  2. Happymodel Diamond F4 ELRS

Happymodel Diamond F4 ELRS

https://www.bzbuas.com/web/image/product.template/588/image_1920?unique=f202ed3
Diamond F4 ELRS all-in-one solution simplifies your setup, reduces weight, and enhances your drone’s performance. Equipped with an F4 processor, it handles complex calculations with ease, ensuring smooth and responsive flight characteristics. The built-in 25mW VTX provides clear video transmission which is crucial for FPV racing. A 5A BLHeli_S ESC supports up to DShot600 for precise motor control, while the integrated OSD and ELRS receiver offer convenient telemetry data and robust long-range connectivity. Perfect for both beginners and pros, the DiamondF4 AIO enhances every flight with reliability and efficiency.
369.00 zł 369.0 PLN 369.00 zł z VAT 
300.00 zł z VAT 
Contact to order

This combination does not exist.

Contact Us

Regulamin
 Wysyłka w ciągu 2-3 dni roboczych

Happymodel Diamond F4 ELRS be lighter than others!

Use the following vtxtable:

  • # vtxtable
  • vtxtable bands 6
  • vtxtable channels 8
  • vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725
  • vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866
  • vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0
  • vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880
  • vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917
  • vtxtable band 6 LOWRACE L FACTORY 5333 5373 5413 5453 5493 5533 5573 5613
  • vtxtable powerlevels 5
  • vtxtable powervalues 10 2 14 16 26
  • vtxtable powerlabels 0 RCE 25 100 400

 


Note: As of November 15, 2021, the antenna length of the 2.4 GHz receiver has changed to 5 cm.

 

Flight controller

(ELRS SPI RX version)DiamondF4 ELRS FC Firmware target: CrazybeeF4SX1280

MCU:STM32F411CEU6 (100MHZ, 512K FLASH)

Sensor: MPU-6000 or ICM20689 or BMI270(SPI connection)

Original whoop size compatible

Power supply: 1S battery input (DC 2.9V-4.35V)

Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready

Built-in Betaflight OSD(SPI Control)

Built-in 5.8G OPEN VTX

Built-in SPI ELRS V2.0/Frsky receiver

Built-in 5V 1A BEC

Onboard 4in1 ESC

MCU upgraded to EFM8BB21

Power supply: 1S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds)

Support BLHeliSuite programmable

Factory firmware: O_H_5_REV16_8.HEX

Default protocol: DSHOT600

Onboard ELRS V2.0 receiver Version

Packet Rate option: 50Hz/150Hz/250Hz/500Hz

ExpressLRS Firmware version: V2.0

RF Frequency: 2.4GHz

Antenna: Enameled copper wire antenna

Telemetry output Power: <12dBm

Receiver protocol:  SPI ExpressLRS

Compatible with ExpressLRS V2.0 TX Module

Couldn’t flash separately ExpressLRS firmware

Onboard 5.8g OPENVTX

Firmware version: OPENVTX

Smartaudio v2.1

PIT Mode support

RCE Mode support

Channels:48ch

Transmitting Power: 0/RCE/25mw/100mw/400mw

Power supply: DC 5V

Current (5v): <650ma (400mw)