Default PLN pricelist
  1. All Products
  2. COMMUNICATION
  3. SiK Telemetry Radio V3 433MHz 500 mW

SiK Telemetry Radio V3 433MHz 500 mW

https://www.bzbuas.com/web/image/product.template/520/image_1920?unique=f20f872
Holybro’s SiK Telemetry Radio V3 433MHz 500 mW is a versatile open-source radio platform, offering 300m+ range and easy plug-n-play compatibility with Pixhawk Standard and other flight controllers. With robust firmware designed for MAVLink integration, it simplifies telemetry connections between autopilots and ground stations. The radio operates at either 915Mhz or 433Mhz, so choose the appropriate model for your region. Additional features include adjustable output power, receive sensitivity, and a transparent serial link. It’s your reliable choice for efficient communication in the world of drones.
399.00 zł 399.0 PLN 399.00 zł z VAT 
324.39 zł z VAT 
Contact to order

This combination does not exist.

Contact Us

Regulamin
 Wysyłka w ciągu 2-3 dni roboczych

Out of sight with SiK Telemetry Radio V3 433MHz 500 mW

This Holybro SiK 433MHz 500 mW telemetry radio is a small, lightweight and inexpensive open source radio module that typically allows a range of better than 300 meters “right out of the box” (range can be extended to several kilometers with a special antenna). This radio is compatible with all Pixhawk Standard and other plug-n-play flight controllers, providing the easiest way to set up a telemetry connection between the autopilot and the ground station. It uses open source software that is specifically designed to work well with the MAVLink protocol and integrate with Mission Planner, Ardupilot, QGroundControl and PX4 Autopilot. The radios can operate in either 915 MHz or 433 MHz mode, and you should buy the model appropriate for your country/region.

 

PRODUCT FEATURES

  • Open source SIK firmware
  • Plug-n-play for standard Pixhawk flight controllers
  • Easiest way to combine autopilot and ground station
  • Interchangeable air and ground radio
  • Micro-USB port (Type-C adapter cable included)
  • JST-GH 6-position connector

 

SPECIFICATION

  • Maximum output power 100 mW (adjustable) -117 dBm receive sensitivity
  • RP-SMA connector
  • Two-way communication via adaptive TDM UART interface
  • Transparent serial link
  • MAVLink protocol
  • Frequency (FHSS) Configurable duty cycle
  • Configurable with Mission Planner and APM Planner tools
  • FT230X/FT231 is a USB to UART IC
  • DIMENSIONS 28 x 53 x 10.7mm (without antennas)

 

ELECTRICAL DATA

  • Power supply voltage: 5V DC (from USB or JST-GH)
  • Maximum current consumption: 100 mA at 20dBm
  • Current consumption: 25 mA
  • Serial interface: 3.3 V UART
  • FCC IDENTIFIER 2AP22-HT03-V3

 

PACKAGE DETAIL

  • 2x Moduł radiowy 433MHz 500 mW z anteną
  • 1x kabel Micro-USB do USB-A
  • Micro-USB to Micro-USB OTG cable *1
  • 1x adapter Micro USB do USB typu C
  • 1x kabel JST-GH 6-pinowy do JST-GH 6-pinowy (do Pixhawk Standard FC)
  • 1x kabel JST-GH 6-pinowy do Molex DF13 6-pinowy (do Pix32, Pixhawk 2.4.6, etc.)

 

Instrukcja:

​Telemetry-Radio-V3-Quick-Start-Guide

GOOD ADVICE can be found at: ardupilot.org/copter/docs/common-configuring-a-telemetry-radio-using-mission-planner.html