Default PLN pricelist
  1. All Products
  2. HOLYBRO
  3. SiK Telemetry Radio V3 433MHz 100 mW

SiK Telemetry Radio V3 433MHz 100 mW

https://www.bzbuas.com/web/image/product.template/519/image_1920?unique=e589139
Holybro’s SiK Telemetry Radio V3 433MHz 100 mW is a versatile open-source radio platform, offering 300m+ range and easy plug-n-play compatibility with Pixhawk Standard and other flight controllers. With robust firmware designed for MAVLink integration, it simplifies telemetry connections between autopilots and ground stations. The radio operates at either 915Mhz or 433Mhz, so choose the appropriate model for your region. Additional features include adjustable output power, receive sensitivity, and a transparent serial link. It’s your reliable choice for efficient communication in the world of drones. 
359.00 zł 359.0 PLN 359.00 zł z VAT 
291.87 zł z VAT 
Contact to order

This combination does not exist.

Contact Us

Regulamin
 Wysyłka w ciągu 2-3 dni roboczych

Impressive range with SiK Telemetry Radio V3 433MHz 100 mW

This Holybro SiK 433MHz 100 mW telemetry radio is a small, lightweight and inexpensive open source radio module that typically allows a range of better than 300 meters “right out of the box” (range can be extended to several kilometers with a special antenna). This radio is compatible with all Pixhawk Standard and other plug-n-play flight controllers, providing the easiest way to set up a telemetry connection between the autopilot and the ground station. It uses open source software that is specifically designed to work well with the MAVLink protocol and integrate with Mission Planner, Ardupilot, QGroundControl and PX4 Autopilot. The radios can operate in either 915 MHz or 433 MHz mode, and you should buy the model appropriate for your country/region.

SiK-Telemetry-Radio-V3-433MHz-100-mW-3

PRODUCT FEATURES

  • Open source SIK firmware
  • Plug-n-play for standard Pixhawk flight controllers
  • Easiest way to combine autopilot and ground station
  • Radio powietrzne i naziemne można między sobą zamieniać
  • Micro-USB port (Type-C adapter cable included)
  • Złącze 6-pinowe JST-GH
  • Two-way communication via adaptive TDM UART interface
  • Transparent serial link
  • Technologia Frequency Hopping Spread Spectrum (FHSS) z konfigurowalnym cyklem pracy
  • Korekcja błędów koryguje do 25% błędów bitowych
  • Configurable with Mission Planner and APM Planner tools
  • FT230X/FT231 jest układem scalonym USB na BASIC UART

 

Specyfikacja SiK Telemetry Radio V3 433MHz 100 mW

Maksymalna moc wyjściowa

100 mW (regulowana)

Czułość odbioru

-117 dBm

Złącze antenowe

RP-SMA

Komunikacja

Dwukierunkowa poprzez adaptacyjny interfejs TDM UART

Konstrukcja protokołu

MAVLink

Wymiary

28 x 53 x 10.7mm (bez anten)

Masa

13.6g (bez anteny)

Masa anteny 433MHz

7.4g

Napięcie zasilania

5V DC (z USB lub złącza JST-GH)

Prąd roboczy

Nadawanie: 100 mA na 20dBm

Odbiór: 25 mA

Napięcie interfejsu szeregowego

3.3 V UART


PACKAGE DETAIL

  • 2x Moduł radiowy 433MHz 100 mW z anteną
  • 1x kabel Micro-USB do USB-A
  • Micro-USB to Micro-USB OTG cable *1
  • Micro USB to Type C adapter
  • 1x kabel JST-GH 6-pinowy do JST-GH 6-pinowy (do Pixhawk Standard FC)
  • 1x kabel JST-GH 6-pinowy do Molex DF13 6-pinowy (do Pix32, Pixhawk 2.4.6, etc.)

 

Instrukcja:

Telemetry-Radio-V3-Quick-Start-Guide

GOOD ADVICE can be found at: https://ardupilot.org/copter/docs/common-configuring-a-telemetry-radio-using-mission-planner.html