PLN
  1. All Products
  2. SiK Telemetry Radio V3 433MHz 100 mW

SiK Telemetry Radio V3 433MHz 100 mW

https://www.bzbuas.com/web/image/product.template/519/image_1920?unique=96f5064
Holybro’s SiK Telemetry Radio V3 433MHz 100 mW is a versatile open-source radio platform, offering 300m+ range and easy plug-n-play compatibility with Pixhawk Standard and other flight controllers. With robust firmware designed for MAVLink integration, it simplifies telemetry connections between autopilots and ground stations. The radio operates at either 915Mhz or 433Mhz, so choose the appropriate model for your region. Additional features include adjustable output power, receive sensitivity, and a transparent serial link. It’s your reliable choice for efficient communication in the world of drones. 
359.00 zł 359.0 PLN VAT Included
291.87 zł VAT Included
Contact to order

This combination does not exist.

Contact Us

Terms and Conditions
Shipping within 2-3 business days

Impressive range with SiK Telemetry Radio V3 433MHz 100 mW

This Holybro SiK 433MHz 100 mW telemetry radio is a small, lightweight and inexpensive open source radio module that typically allows a range of better than 300 meters “right out of the box” (range can be extended to several kilometers with a special antenna). This radio is compatible with all Pixhawk Standard and other plug-n-play flight controllers, providing the easiest way to set up a telemetry connection between the autopilot and the ground station. It uses open source software that is specifically designed to work well with the MAVLink protocol and integrate with Mission Planner, Ardupilot, QGroundControl and PX4 Autopilot. The radios can operate in either 915 MHz or 433 MHz mode, and you should buy the model appropriate for your country/region.

SiK-Telemetry-Radio-V3-433MHz-100-mW-3

Product features

  • Open source SIK firmware
  • Plug-n-play for standard Pixhawk flight controllers
  • Easiest way to combine autopilot and ground station
  • Interchangeble air and ground unit
  • Micro-USB port (Type-C adapter cable included)
  • 6-pin JST-GH connector
  • Two-way communication via adaptive TDM UART interface
  • Transparent serial link
  • Frequency Hopping Spread Spectrum (FHSS) technology with configurable duty cycle
  • Error correction corrects up to 25% of bit errors
  • Configurable with Mission Planner and APM Planner tools
  • FT230X/FT231 is a USB-to-BASIC UART integrated circuit.  

SiK Telemetry Radio V3 433MHz 100 mW - Specification

Max output power

100 mW (regulowana)

Receive sensitivity

-117 dBm

Antenna connector

RP-SMA

Communication

2-way full-duplex communication through adaptive TDM UART interface  

Protocol

MAVLink

Dimensions

28 x 53 x 10.7mm (w/o antennas)

Weight

13.6g (w/o antennas)

433MHz antenna weight

7.4g

Input voltage

5V DC (from USB or JST-GH)

Transmit current

Transmit: 100 mA @ 20dBm

Receive: 25 mA

Serial interface

3.3 V UART


PACKAGE DETAIL

  • 2x telemetry radio module 433MHz 100 mW w/ antenna
  • 1x cable Micro-USB to USB-A
  • Micro-USB to Micro-USB OTG cable *1
  • Micro USB to Type C adapter
  • 1x cable JST-GH 6-pin to JST-GH 6-pin (do Pixhawk Standard FC)
  • 1x cable JST-GH 6-pin to Molex DF13 6-pin (do Pix32, Pixhawk 2.4.6, etc.)

 

User manual:

Telemetry-Radio-V3-Quick-Start-Guide

GOOD ADVICE can be found at: https://ardupilot.org/copter/docs/common-configuring-a-telemetry-radio-using-mission-planner.html