PLN
  1. All Products
  2. PM06D Power Module 14S

PM06D Power Module 14S

https://www.bzbuas.com/web/image/product.template/498/image_1920?unique=c8c8ce5
The PM06D Power Module is a reliable and efficient solution for powering your Pixhawk® 5X & 6X flight controllers. It offers a regulated power supply for your Pixhawk from a 2S to 14S LiPo battery, as well as the ability to monitor current consumption and battery voltage. This versatile module comes equipped with a built-in power distribution feature, allowing you to power your Electronic Speed Controllers (ESCs) and Flight Controller (FC) from the same board.
129.27 zł 129.27 PLN VAT Excluded
129.27 zł VAT Excluded
Contact to order

This combination does not exist.

Contact Us

Terms and Conditions
Shipping within 2-3 business days

Moduł zasilania PM06D (14S) żeby prąd płynął regularnie

PM06D is supported by PX4. For Ardupilot, it is supported in version 4.4 and later.

This PM uses I2C digital signal data output and is not compatible with a flight controller that uses analog PM such as the Pixhawk 6C & Mini, Pixhawk4 & Mini, pix32 v5, or Durandal flight controllers.


Power module PM06D (14S) compatible with CubePilot and Ardupilot

PM06D Power Module provides a regulated power supply for your Pixhawk® 5X & 6X from the battery, as well as current consumption and battery voltage measurements, all through a 6-pin cable. It has built-in power distribution, allowing you to power your ESC and FC with the same board.

The on-board switching regulator outputs 5.2V and a maximum of 3A from LiPo batteries up to 14S. The Power Module comes completely assembled with an XT60 connector and a capacitor. The Molex 2.00mm pitch CLIK-Mate Wire-to-Board connector is rated for 3.0A current per contact.


PM06D (14S) Power module - Specification

The PM06D comes with XT60 plugs with 14 AWG silicone wires rated for 30A continuous current and 60A burst current (<1 minute). If a higher current is needed, the plug type and wire size should be changed accordingly. You can refer to this chart as a reference.


Connector type

Cable gauge

Cont. current (4 hours, temperature increase < 60 °C)

Burst current (1 minute, temperature increase < 60 °C)

XT60

12 AWG

30 A

60 A

XT90

10 AWG

45 A

90 A

XT120

8 AWG

60 A

120 A

AS150

8 AWG

75 A

150 A

AS300

6 AWG

150 A

300 A


PX4 Parameter setup:

  • If you are using the PM06D 14S version, you must set SENS_EN_INA228 to enable.


Moduł-zasilania-PM06D-(14S)

Moduł-zasilania-PM06D-(14S)


PM06D (14S) Power module - Specification

Input voltage

2S - 14S

PCB Cont. Current Rating

70A

PCB Burst Current Rating

120A (< 60 sec)

Max current sensing

327A

Connector outputs

5.2V @ 3A max

Mounting holes

30.5mm * 30.5mm

Dimensions

35 x 35 x 35 mm

Weight

24.5 g


 

PM06D (14S) Power module - Package contains

  • 1x PM06D Power Module
  • 1x cable JST-GH 6-pin 150mm