BT2.0 Connectors | Male(10PCS)

BT2.0 connector - the biggest revolution in Whoop 1S drones

Nowe BT2.0 to ulepszone złącze akumulatora o niższym oporze niż PH2.0. Zostało zaprojektowane, aby zmniejszyć spadek napięcia i utrzymać je na bardziej stabilnym poziomie podczas lotu. Mniejszy spadek napięcia może również dać ci trochę więcej czasu lotu. Złącze BT2.0 ma podobną konstrukcję do swoich większych braci XT30 oraz XT60, dzięki czemu połączenie jest bardzo solidne, a zaokrąglony kształt zapobiega odwrotnej polaryzacji.

Is it worth it to switch to BT2.0?

See more from  Joshuy's Bardwellavideo - it's the proof that BT2.0 connector is better than PH 2.0.

Since February 2019, we have been receiving feedback on Facebook about how much pilots need a high-quality BT2.0 connector in 1S whoop drones. So we started our long-term research on the 1.0mm banana connector design and stable manufacturing technique to meet the pilots' demands. Betafpv is always moving forward with a passion for breakthrough experiences.

FEATURES

• The BT2.0 connector has effectively reduced the internal resistance of the connector by improving the crimp pins for the banana connector and increasing the cross-sectional area of the banana connector.
• With these connectors, it can support 9A continuous current and 15A instantaneous current, while the PH2.0 connector supports 4.5A continuous current.
• By solving the voltage drop problem, the discharge of the 300mAh 1S BT2.0 lipo battery becomes more efficient. Pilots can enjoy longer flight time without interference from low voltage warning.
• Compared to crimped PH2.0 pins, the BT2.0 connector is more durable and can discharge higher currents at the same capacity and provide much more power. You can get 2 minutes of full throttle flight on the Meteor65 if you use our BT2.0 300mah 1S battery.

SPECYFIKACJA ZŁĄCZE BT2.0 (10 SZTUK)

Uwaga: Obudowa konektora identyfikuje biegun dodatni i ujemny i musi być przylutowana zgodnie z instrukcjami.

BT2.0 connector

The exclusive BT2.0 connector designed by BETAFPV has broken the barrier of the PH2.0 connector The BT2.0 connector has effectively reduced the internal resistance of the connector to allow more current to be transmitted, meaning it supports a continuous current of 9A (15A burst), offering more power and longer flight time on 1S brushless drones, while the PH2.0 only supports 4.5A You can enjoy longer flight time without the interference of low voltage warning by solving the voltage sag problem. For more information, click here.

Below is a chart comparing the BT2.0 connector with the PH2.0 connector (solid pins version) in the BETAFPV 1S 300mAh battery. The discharge current in this test is 9A. You can see that the discharge time is twice as long (about 2 minutes) for the BT2.0 connector.

Accessories for BT2.0 series

We know that some pilots may have questions about what to do with an old battery with a PH2.0 1S connector. So we provide accessories such as single BT2.0 connectors for those who want to convert PH2.0 connector to BT2.0 connector.

• BT2.0 connectors (10 pieces)
• BT2.0 1S Whoop Pigtail Cable
• BT2.0-PH2.0 adapter cable

We highly recommend the following products with BT2.0 connectors or cables. In the future, BETAFPV will work closely with more manufacturers to provide customers with better service and experience.

• BT2.0 450mAh 1S Battery
• BT2.0 300mAh 1S Battery
• BT2.0 battery charger and voltage tester
• BT2.0 series quadcopters
• 6-port charger and adapter for 1S batteries
• Chargers and batteries of other brands with BT2.0 port

 ZESTAW ZAWIERA:

• 10* złącze BT2.0 męskie