RFD868x-EU Modem

High-performance radio modem operating in the ISM (Industrial, Scientific and Medical) band. It is designed for long-range communications applications requiring best-in-class radio link performance.

535.77 zł z VAT

This combination does not exist.

Add to cart

Regulamin
Wysyłka w ciągu 2-3 dni roboczych

RFD - is the flagship product of the Australian company RFDesign

RFD868x-EU Modem is a device certified in the European Union. This version, has limited operating modes of low power (5mW) - with full fill and high power mode (500mW) - with low fill. The low-power mode significantly reduces range and the high-power mode will significantly reduce throughput. These modes are in accordance with EU requirements and cannot be changed.

RFD is a long-range telemetry and communication system. The RFD system consists of RFD modems, a set of antennas and the cables necessary to connect the modules to other systems.

For more on RFD modems, their differences and applications, see our authoritativearticle..

At the heart of each system are RFD modems, which are high-performance radio modems operating in the ISM (Industrial, Scientific and Medical) band. They are designed for long-range communications applications requiring best-in-class radio link performance. One of the modems is always part of the GCS (Ground Control Station), while the other is part of the project with which communication is required, such as an unmanned aerial vehicle.

PRODUCT FEATURES

Long range > 20 km depending on antennas and GCS configuration
2 x RP-SMA RF connectors, collectively switched,
Transmission power of 500 mW (+ 27 dBM),
Low-pass filter transmission,
>20dB amplifier with low noise, high IP3,
RX SAW filter,
All inputs / outputs protected from ESD and filtered,
Re-implemented SiK and Multipoint SiK software, with field upgrades, easy to configure,
Small, lightweight

The RFD868x will not communicate with the RFD868x-EU modem unless the standard RFD868x is configured to the same frequency as the EU modem.

INTERFACES:

RF: 2 x RP-SMA connectors,
Serial: TTL logic level (+ 3.3 v),
Power: + 5 V, ~ 800 mA max Peak (at maximum transmit power),
GPIOS: 6 general purpose IOs (with Digit support).

SPECIFICATION

For full product description and specifications, please see the attachment.

ZAKRES CZĘSTOTLIWOŚCI	868 - 869 MHz
MOC WYJŚCIOWA	500 mW(+ 27 dBm), kontrolowana w krokach co 1 dB (+/-1 dB@= 20d Brn typowo)
PRĘDKOŚĆ TRANSMISJI DANYCH W SIECI LOTNICZEJ	500 mW(+ 27 dBm). kontrolowana w krokach co 1 dB (+/-1 dB@= 20 dBm typowo) (ustawine przez użytkownika. domyślnie 64 kbit, wartości są prawidłowe dla wersji 3.16 oprogramowania SiK)
PRĘDKOŚĆ TRANSMISJI DANYCH UART	1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400, 460800, 1M bodów (ustawiane przez użytkownika. domyślnie 57600, wartości są prawidłowe dla wersji 3.16 oprogramowania SiK
CZUŁOŚĆ ODBIORU	powyżej 111 dBm dla 17 kbps, 105 dla 64 kbps, 98 dla 700kbps
MONTAZ	3 x śruby M2,5, 3 x punkty lutownicze do pinów
ZASILANIE ZNAMIONOWE	znamionowe +5 V. (min. +3,5 V. maks. +5,5 V). szczyt ~ 800 mA przy maksymalnej mocy
TEMPERATURA PRACY	od-40 do +85°C (testowane od -73 do +123°C)
WYMIARY	30 x 57 x 12.8 mm (w tym osłona RF, radiator i końcówki złącza)
MASA	14,5 g

The modem is intended for system integrators who will integrate the modem into their own product designs and prototypes. It is the user's responsibility to comply with local radio transmitter regulations.