Atlatl HV V2 VTx - 1.2GHz 1W

Atlatl HV V2 VTX - 1.2GHz 1W is a low-frequency VTX compared to VTXs with a frequency bandwidth of 5.8G. It has excellent diffraction capability and strongly counteracts interference and external penetration. Images are clear and stable, and it provides long transmission distance in various operating environments.

191.00 zł z VAT

This combination does not exist.

Add to cart

Regulamin
Wysyłka w ciągu 2-3 dni roboczych

Nadajnik wideo Atlatl HV V2 VTx - 1.2GHz 1W niskie częstotliwości, większy zasięg

Cechy Nadajnik wideo Atlatl HV V2 VTx - 1.2GHz 1W

It supports up to 9 frequency channels.
Variable transmit power: Pit/ 25/ 200/ 1000mW.
Pit mode allows for safe power without the risk of throwing other pilots into space.
Built-in microphone so you can listen to the engines as you fly, no matter how far away you are.
Standard 30.5 x 30.5 mm mounting holes allow the Atlatl to be mounted directly into the flight controller stack.

Adjustment of output power and frequency channel

Atlatl HV V2 VTx - 1.2GHz 1W regulacja-czestotliwosci-i-kanalu

Transmission power

	Tryb Pit	25 mW	200 mW	1000 mW
P2	ON	OFF	ON	OFF
P1	ON	ON	OFF	OFF

Frequency table

	CS3	CS3	CS1	S1
CH1: 1080MHz	ON	ON	ON	OFF
CH2: 1120MHz	OFF	ON	ON	OFF
CH3: 1160MHz	ON	OFF	ON	OFF
CH4: 1200MHz	OFF	OFF	ON	OFF
CH5: 1240MHz	ON	ON	OFF	OFF
CH6: 1280MHz	OFF	ON	OFF	OFF
CH7: 1320MHz	ON	OFF	OFF	OFF
CH8: 1380MHz	OFF	OFF	OFF	OFF
CH9: 1258MHz	ON	ON	OFF	ON

CAUTION: Make sure to connect the antenna before turning it on! Otherwise you will burn the module.

SPECYFIKACJA Nadajnik wideo Atlatl HV V2 VTx - 1.2GHz 1W

Output power	0,5 mW (tryb pit), 25 mW, 200 mW, 1000 mW
Sound	Monophonic 6.5 MHz ( optional 6.0 MHz )
Antenna connector	MMCX
Input voltage	2-8S LiPo
Dimensions	35x35x9 mm
Mounting holes:	Standard 30.5 mm square to center of holes
Weight	9.3 g (VTX only)

PINOUT Nadajnik wideo Atlatl HV V2 VTx - 1.2GHz 1W

Atlatl HV V2 VTx - 1.2GHz 1W-pinout

ZESTAW Nadajnik wideo Atlatl HV V2 VTx - 1.2GHz 1W ZAWIERA

1x Atlatl HV V2 VTx - 1.2GHz 1W
1x kabel 80 mm SMA~MMCX
1x 150mm 4Pin JST GH harness