M03 VTX
Ultralekki analogowy M03 5.8G VTX - Nadajnik wideo
M03 VTX, an ultralight and high output power 5.8GHz analog VTX, is designed for 65-85mm whoop drone for longer range flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and fun.
Note: The current version for M03 VTX is V1.1.
Bullet Point
- With the 25-350mW output power, M03 VTX provides a stable image and strong transmission.
- Only 1.1g and a tiny size for drones like 65-85mm whoop drones. The screw mounting holes pattern is suitable with BETAFPV micro canopy. The camera connector JST-0.8 is suitable with BETAFPV C02 and C03 camera.
- Comes with an IPX type of antenna, just plug and play, no extra solder work needed.
- M03 VTX is perfectly suitable for the 65-85mm whoop drone. We highly recommend using it with ELRS 2.4G FC board, like F4 1S 5A FC (ELRS 2.4G) or F4 1S 12A FC (ELRS 2.4G).
Specyfikacja M03 5.8G VTX - Nadajnik wideo
Moc wyjściowa | PIT/25/100/200/400mW (V1.1, regulowana) |
Zakres napięcia zasilania | 4.5-5.5V |
Masa | 1,1g (bez anteny) |
Wymiary | 18X14mm |
Częstotliwość | 5.8GHz 48 kanałów, z pasmem Raceband: 5658~5917MHz |
Zmiana kanałów | SmartAudio |
Typ modulacji | FM |
Frequency control: PLL | PLL |
Stabilność częstotliwości | ±100KHz (typ.) |
Precyzja częstotliwości | ±200KHz (typ.) |
Błąd nośnej kanału | ±1,5dB |
Port antenowy | 50 Ω |
Temperatura pracy | -10°C~+80°C |
Złącze kamery | Camera connector: JST-0.8, compatible with the camera like BETAFPV C01, BETAFPV C02 and NewBeeDrone BeeEye. |
Diagram
Below is the diagram of the M03 VTX. The camera connector is JST-0.8 and it is compatible with cameras like BETAFPV C01, BETAFPV C02, C03 and NewBeeDrone BeeEye.
How to Connect with FC
Here is the diagram about how to connect the M03 VTX with F4 1S 5A FC (ELRS 2.4G) board.
Here is the diagram about how to connect the M03 VTX with F4 1S 12A FC (ELRS 2.4G) board.
Change Band & Channel & Power
M03 VTX could only use the Smart Audio port to change the band and channel. Enter the OSD menu by radio transmitter sticks ( Pitch Stick UP and Yaw Stick Left). Then FEATURES -> VTX SA to change the frequency point and power.
Switchable power includes 25mW, 100mW, 200mW and 350mW. Except the method via OSD menu as show above, the output power could be changed via the power button.
Below is the frequency table of M03 VTX V1.0 and V1.1.
Tabela VTX dla M03 (V1.0) | vtxtable bands 5 vtxtable channels 8 vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725 vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866 vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0 vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880 vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917 vtxtable powerlevels 4 vtxtable powervalues 0 1 2 3 vtxtable powerlabels 25 100 200 350 set vtx_band = 4 set vtx_channel = 4 set vtx_power = 1 set vtx_freq = 5800 save |
Tabela VTX dla M03 (V1.1) | vtxtable bands 5 vtxtable channels 8 vtxtable band 1 BOSCAM_A A FACTORY 5865 5845 5825 5805 5785 5765 5745 5725 vtxtable band 2 BOSCAM_B B FACTORY 5733 5752 5771 5790 5809 5828 5847 5866 vtxtable band 3 BOSCAM_E E FACTORY 5705 5685 5665 0 5885 5905 0 0 vtxtable band 4 FATSHARK F FACTORY 5740 5760 5780 5800 5820 5840 5860 5880 vtxtable band 5 RACEBAND R FACTORY 5658 5695 5732 5769 5806 5843 5880 5917 vtxtable powerlevels 5 vtxtable powervalues 1 0 2 3 4 vtxtable powerlabels 25 PIT 100 200 400 save |
Package detail
- 1 * M03 5.8G VTX - Nadajnik wideo (z dołączoną anteną)
- 5 * 30AWG silicone wire (30mm)